Articles tagged Hail Damage Roofing Inspection. Sellers Roofing of Saint Paul inspects, documents, and repairs hail damage for homeowners and businesses across the Twin Cities — with insurance-claim assistance on every visit.
Short answer: No, not always. If hail hit one slope, you may only need a targeted repair or partial replacement. Replace the full roof when hail caused membrane breaks, hidden moisture, structural damage, or when the roof is old enough that fixing one side won’t last. A proper inspection should drive the decision. A hail…
Adjusters verify hail damage on asphalt shingles by matching storm data with physical roof evidence. They look for fresh impact marks, bruising, broken shingle mat, granule loss, and related hits on metal vents or gutters. Just as important, they rule out age, blistering, foot traffic, and other wear before they approve a claim. When This…
You know your roof has hail damage when a recent storm is followed by random impact marks, dents on soft metals, bruising or punctures in the roofing surface, damaged flashing, or new interior leaks. On commercial buildings, the clearest signs often show up around seams, drains, rooftop units, and metal edges, not in one obvious…
Yes, quarter size hail damage can happen on a new asphalt shingle roof. A newer roof usually handles impact better than an older one, but it isn’t immune. One-inch hail can knock off granules, bruise the shingle mat, crack edges, and shorten roof life, especially when wind, storm speed, and hail density increase the force….
(Saint Paul homeowners and property managers): hail damage asphalt shingles usually shows up as (1) round “bruises” where the shingle mat fractures under the surface, (2) clean granule loss spots with a defined impact area, and (3) a repeating pattern of similar-sized hits across the same roof slope (often on the windward side). The fastest…
Commercial PVC roof hail damage is inspected by checking the interior, reviewing the storm, and then walking the roof in a grid. The inspector looks for punctures, split seams, cracked flashing, wet insulation, and rooftop unit damage, then documents each finding to decide between repair, section work, or replacement. When This Applies Who should use…
Hail damage on roof flashing usually shows up as small round dents, sharp dings along edges, chipped coating or paint, and bent hems or corners where metal is thinnest. In Minnesota, freeze and thaw can turn those minor strikes into opened seams and cracked sealant, which often leads to leaks at parapet edges, wall transitions,…
New roof hail damage usually looks clean, sharp, and recent, while old hail damage looks weathered, dirty, oxidized, or blended into the roof’s age. The best clues are the storm date, fresh exposed material, sharp impact edges, matching dents on metal components, and whether the roof shows new leaks or newly broken seams. When This…
Use the ground first, not the roof. A safe roof hail damage inspection relies on binoculars, drone photos, metal impact clues, interior moisture signs, and, when needed, infrared or electronic testing. This works best when shingles are steep, brittle, wet, old, or part of a larger commercial property where foot traffic could create more damage….
Identifying hail damage is critical for maintaining a standing seam metal roof. Standing seam hail damage usually shows up as fresh dents in the flat pans, bruised ridges near the seams, chipped coating that exposes bare metal, and bent edge metal or flashing. The quickest way to confirm it is to compare impact marks across…
A hail test square is a measured 10×10 ft square (100 square feet) section of roof used as a sample area to assess hail damage after a hailstorm. Inspectors mark the square, examine it closely, then count only the hail impacts that cause functional damage (dents, fractures, punctures, or bruising that shortens roof life). Those…
Short answer: Look for fresh granule loss, sharp chips, and small cracks right at the shingle’s outer edges and corners. Hail hits often leave random, uneven marks, not a uniform “worn” look. Check for bruising (a soft spot) under the granules, and compare several areas on different slopes. If multiple corners show fractures, the roof…
Contact Sellers Roofing Company today for your free, no-obligation estimate!
Sellers Roofing Company is your premier Saint Paul destination for expert commercial and residential roofing services, offering comprehensive solutions from storm damage restoration and repairs to new asphalt shingle installations, all with meticulous craftsmanship and an eye for enhancing your property’s safety and aesthetic.