Articles tagged Roof Inspection Guide. Sellers Roofing offers free roof inspections across Saint Paul, MN — photo-documented reports for residential and commercial properties.
Look for fresh, sharp-edged impact marks along the roof’s highest line. On asphalt shingle ridge caps, that often means round granule-loss spots from impact damage, “bruises” that feel soft when pressed, or cracked corners. On metal ridge caps, watch for dents, scuffed coating, and loosened fasteners. Compare both sides of the ridge, because hail usually…
Short answer: Identify synthetic slate hail damage by looking for fresh impact marks that don’t match normal aging: chipped edges and broken corners on slate shingles, star-like cracks, surface bruising (dull, scuffed “pock” spots). Then confirm the pattern makes sense for hail (random, wind-driven, on exposed slopes) and document it with clear photos and counts…
Short answer: On algae-streaked asphalt shingles, hail damage usually shows up as crisp, round spots of granule loss, small cracks, or “bruises” that feel soft when you press them. Algae staining looks like a surface smear or streak, not distinct impact marks. Confirm hail by checking matching dents on metal roof parts, then photograph patterns…
Yes. Hail damage, a common form of storm damage, can weaken a roof without cracking asphalt shingles or leaving obvious holes. Impacts can bruise the shingle mat, knock off protective granules, loosen fasteners, and stress seams and flashing. On low-slope commercial roofs, hail can cause small punctures or membrane fractures that stay hidden until leaks,…
To document roof hail damage for insurance claims, take wide photos of the entire roof, slope-by-slope roof images, close-ups of shingle impact marks, and photos of dents on soft metals like gutters and vents. Include a ruler or coin for scale, and document the storm date and any temporary repairs. Proper photo documentation helps prove…
Hail damage vs weathering process usually comes down to pattern and texture. Hail damage leaves random, coin-sized bruises and sharp granule loss in scattered spots. The weathering process looks even, with gradual fading and uniform granule loss along edges and high-flow areas. If you see circular impact marks, matching hits on vents, and fresh granules…
Start with a controlled interior-to-roof check: map the wet area inside, match it to the drain line path, then inspect the drain bowl, clamping ring, and membrane at the flange for gaps, cracks, or loose hardware. If the source still isn’t clear, run a low-pressure water test around the drain and document results for targeted…
Use a ceiling moisture meter to turn a vague stain into a clear wet-to-dry boundary. Start by finding a dry “baseline” area, then take readings in a grid around the stain. Mark where readings rise above baseline and trace that outline on a sketch or reflected-ceiling plan. The shape and direction of that wet zone…
A skylight flashing leak usually shows up as a roof leak in the form of staining that starts at the skylight’s edges (often the uphill side) and worsens during wind-driven rain or thaw cycles. A skylight unit leak or condensation issue tends to leave moisture on the glass, frame, or inside corners first. The fastest…
Short answer: Identify hail damage on luxury asphalt shingles by looking for random impact marks across multiple slopes, fresh granule loss with dark asphalt showing, cracked or bruised spots that feel soft when gently pressed, and matching damage on roof “soft metals” like vents and flashing. Document findings with clear photos, note the storm date,…
Short answer: To spot hail damage roof valleys, focus on what valleys do best: collect water, granules, and debris. From the ground, look for streaks of washed-out granules, bent or dented valley metal, and uneven shingle lines where the valley “channels” runoff. If you can access the roof safely, check for circular bruises, granule loss,…
A wind-driven roof leak usually enters on the windward side during wind-driven rain, then travels before it shows up inside. Identifying the source of a roof leak is the first step in proper roof maintenance for Minnesota property owners. To find it without climbing, document the wind direction, then take eight clear ground photos of…
Contact Sellers Roofing Company today for your free, no-obligation estimate!
Sellers Roofing Company is your premier Saint Paul destination for expert commercial and residential roofing services, offering comprehensive solutions from storm damage restoration and repairs to new asphalt shingle installations, all with meticulous craftsmanship and an eye for enhancing your property’s safety and aesthetic.