Articles tagged Roof Inspection Guide. Sellers Roofing offers free roof inspections across Saint Paul, MN — photo-documented reports for residential and commercial properties.
Roof leak detection on asphalt shingle roofs starts by tracing water backward from the interior stain to the roof area above it. Roofers then inspect shingles, flashing, valleys, vents, and nail lines for breaks or trapped moisture. They confirm the source with visual checks, moisture tools, and controlled water testing, because the drip point inside…
(Saint Paul homeowners and property managers): hail damage asphalt shingles usually shows up as (1) round “bruises” where the shingle mat fractures under the surface, (2) clean granule loss spots with a defined impact area, and (3) a repeating pattern of similar-sized hits across the same roof slope (often on the windward side). The fastest…
Nail pops on asphalt shingles show up as small, raised bumps where a shingle tab lifts because nail heads have pushed up. In the Minnesota climate, freeze-thaw swings make them easier to spot during late winter and early spring. Look for uneven shingle lines, lifted corners, exposed nail heads, and tiny cracks or granule loss…
On an asphalt shingle roof, roof leak detection usually takes 30 minutes to 2 hours. Harder cases can take 3 to 4 hours, especially after storms, on larger commercial buildings, or when water has traveled through decking or attic spaces. If the leak isn’t active, the visit may split into inspection now and confirmation during…
Yes, infrared scans can often find likely wet insulation on EPDM roofs by showing temperature differences between damp and dry areas, usually after sunset. Still, a scan is not final proof. The best practice is to confirm suspicious spots with a roof inspection, moisture testing, and a few small core samples. That distinction matters to…
Hail damage on roof flashing usually shows up as small round dents, sharp dings along edges, chipped coating or paint, and bent hems or corners where metal is thinnest. In Minnesota, freeze and thaw can turn those minor strikes into opened seams and cracked sealant, which often leads to leaks at parapet edges, wall transitions,…
You detect a built-up roof leak without core cuts by layering built-up roof leak detection methods, not by guessing. Start with interior leak mapping, inspect the roof surface, scan for trapped moisture with infrared, confirm wet areas with a moisture meter, and use electronic leak detection when the roof surface allows it. That usually narrows…
To detect a modified bitumen roof leak, inspect seams, flashings, blisters, splits, drains, and ponding areas, then confirm hidden moisture with infrared scanning, electronic testing, or small test cuts. Don’t trust the interior drip alone, because water often travels under the membrane before it shows inside. A ceiling stain is like smoke, not the fire….
Yes, in many cases you can detect a commercial roof leak detection issue without shutting down the building. The safest approach is to map interior signs, inspect the roof surface, use infrared moisture scanning, and confirm problem areas with low-voltage electronic testing. That keeps disruption low and helps crews target the real leak, not just…
Use the ground first, not the roof. A safe roof hail damage inspection relies on binoculars, drone photos, metal impact clues, interior moisture signs, and, when needed, infrared or electronic testing. This works best when shingles are steep, brittle, wet, old, or part of a larger commercial property where foot traffic could create more damage….
Usually, a yellow ceiling stain means moisture got in at some point, but it isn’t always an active roof leak. If the stain is growing, feels damp, or shows up after rain or snowmelt, treat it as a current leak until proven otherwise. If it’s dry, crisp-edged, and hasn’t changed in months, it may be…
A professional roof inspection and roof leak detection report for insurance should be performed by a licensed, insured commercial roofing professional (or an independent roof consultant) who can document cause, location, and extent of damage with photos, test results, and clear repair scope. Avoid relying on maintenance staff or a general handyman. Insurers want credible…
Contact Sellers Roofing Company today for your free, no-obligation estimate!
Sellers Roofing Company is your premier Saint Paul destination for expert commercial and residential roofing services, offering comprehensive solutions from storm damage restoration and repairs to new asphalt shingle installations, all with meticulous craftsmanship and an eye for enhancing your property’s safety and aesthetic.