When storms hit, your home takes the brunt of it — especially the roof, siding, and windows. This section brings together real-world advice, expert insights, and recovery checklists to help you respond quickly after hail, wind, or heavy rain. Whether you’re unsure how to spot damage, need insurance tips, or want to know what repairs should come first, our storm damage blog posts have you covered. Start here to protect your property and make smart decisions after the storm passes.
Hail damage on roof flashing usually shows up as small round dents, sharp dings along edges, chipped coating or paint, and bent hems or corners where metal is thinnest. In Minnesota, freeze and thaw can turn those minor strikes into opened seams and cracked sealant, which often leads to leaks at parapet edges, wall transitions,…
New roof hail damage usually looks clean, sharp, and recent, while old hail damage looks weathered, dirty, oxidized, or blended into the roof’s age. The best clues are the storm date, fresh exposed material, sharp impact edges, matching dents on metal components, and whether the roof shows new leaks or newly broken seams. When This…
Short answer: Cosmetic hail damage on a metal roof means metal roof hail damage like dents, dings, or surface marks that change the look of the panels but don’t stop the roof from shedding water. Even with dings, the roof remains a functional barrier to elements. In other words, the panels still lock together, fasteners…
Use the ground first, not the roof. A safe roof hail damage inspection relies on binoculars, drone photos, metal impact clues, interior moisture signs, and, when needed, infrared or electronic testing. This works best when shingles are steep, brittle, wet, old, or part of a larger commercial property where foot traffic could create more damage….
Yes. Pea-size hail can cause hidden hail damage on asphalt shingles, especially when wind drives impacts, shingles are older, or temperatures are cold. The damage often shows up as bruising under the granules, tiny fractures, or loosened seal strips, not dramatic holes. From the ground, the roof can look “fine,” yet its lifespan may drop…
Identifying hail damage is critical for maintaining a standing seam metal roof. Standing seam hail damage usually shows up as fresh dents in the flat pans, bruised ridges near the seams, chipped coating that exposes bare metal, and bent edge metal or flashing. The quickest way to confirm it is to compare impact marks across…
A hail test square is a measured 10×10 ft square (100 square feet) section of roof used as a sample area to assess hail damage after a hailstorm. Inspectors mark the square, examine it closely, then count only the hail impacts that cause functional damage (dents, fractures, punctures, or bruising that shortens roof life). Those…
A professional roof inspection and roof leak detection report for insurance should be performed by a licensed, insured commercial roofing professional (or an independent roof consultant) who can document cause, location, and extent of damage with photos, test results, and clear repair scope. Avoid relying on maintenance staff or a general handyman. Insurers want credible…
Short answer: Look for fresh granule loss, sharp chips, and small cracks right at the shingle’s outer edges and corners. Hail hits often leave random, uneven marks, not a uniform “worn” look. Check for bruising (a soft spot) under the granules, and compare several areas on different slopes. If multiple corners show fractures, the roof…
Metal roof hail damage usually shows up as visible dents, chipped paint or coating, loosened flashing, and dings along seams, ribs, and trim. In Minnesota, Minnesota weather’s freeze-thaw cycles can turn small impact marks into rust spots or leaks later. The key is separating cosmetic denting from functional damage that affects water-shedding and fasteners, compromising…
Short answer: Identify synthetic slate hail damage by looking for fresh impact marks that don’t match normal aging: chipped edges and broken corners on slate shingles, star-like cracks, surface bruising (dull, scuffed “pock” spots). Then confirm the pattern makes sense for hail (random, wind-driven, on exposed slopes) and document it with clear photos and counts…
Short answer: On algae-streaked asphalt shingles, hail damage usually shows up as crisp, round spots of granule loss, small cracks, or “bruises” that feel soft when you press them. Algae staining looks like a surface smear or streak, not distinct impact marks. Confirm hail by checking matching dents on metal roof parts, then photograph patterns…
Contact Sellers Roofing Company today for your free, no-obligation estimate!
Sellers Roofing Company is your premier Saint Paul destination for expert commercial and residential roofing services, offering comprehensive solutions from storm damage restoration and repairs to new asphalt shingle installations, all with meticulous craftsmanship and an eye for enhancing your property’s safety and aesthetic.